+49 2501 - 9 78 58 80 (Monday - Friday, 09:00 - 17:00 h)

  Our competent sales team is looking forward to your call!

  Contact: support[at]didactum-security.com

AKCP Wireless Sensor Thermal Map

300.00€ *
Content: 1 Piece

Prices plus VAT plus shipping costs

Delivery time 15 Workdays


  • E_17602
  • AKCP Wireless Sensor Thermal Map
The Thermal Map wireless sensor temperature was developed by the manufacturer AKCess Pro... more
Product information "AKCP Wireless Sensor Thermal Map"

The Thermal Map wireless sensor temperature was developed by the manufacturer AKCess Pro specifically for measuring and monitoring the temperature and humidity in the 19 inch server cabinet. Risks and dangers in the server cabinet, such as overtemperature, heat, static discharge or condensation, can be detected at an early stage by using this wireless sensor Costly IT downtime due to overheated network, backup or server hardware can be avoided.

Typical applications of the AKCP Thermal Map wireless sensor include: 

  • Temperature monitoring as part of rack monitoring
  • Measurement of environmental factor humidity in the IT rack
  • Monitoring the air inlet temperature of the server cabinet
  • Checking the air outlet temperature of the IT rack
  • Identification of hotspots in a 19 " server cabinet
  • Long-term recording of temperature and humidity (RH) 

Model versions of the Thermal Map wireless sensor

This Thermal Map wireless sensor is available from the official AKCP dealer Didactum® in 2 different versions. Simply select the desired wireless sensor set here in the AKCP Shop: 

  • Thermal Map wireless sensor set consisting of 3 dual sensors temperature & humidity
  • Thermal Map wireless sensor set consisting of 6 dual sensors temperature & humidity


With the Thermal Map wireless sensor set consisting of 6 pieces of temperature and humidity, you can measure & monitor the air inlet and outlet temperatures above, in the middle and bottom of the 19 inch server cabinet. Check the measured temperature difference to detect dangerous hotspots in your mission-critical 19-inch server rack.

Integration of the AKCP wireless sensor into the L-DCIM gateway

Once you have installed this temperature and humidity wireless sensor unit to the server cabinet, it will coupled with the optional available AKCP L-DCIM Wireless Sensor Gateway. An integral part of this L-DCIM gateway is the AKCP Pro Server DCIM solution. The administrators and IT managers receive a powerful holistic tool with the AKCP Pro Server platform to monitor the IT infrastructure.

Editor's note: 

AKCP Pro Server combines physical environmental monitoring,power and voltage monitoring, access control and video monitoring in a single management platform. The wireless AKCP sensors based on the LoRa wireless technology, as well as existing sensorProbe / securityProbe monitoring devices including the wired sensors, are permanently monitored by AKCP Pro Server management solution. If desired, third-party SNMP sensors and Modbus devices can also be integrated.

Rack Monitoring: Notifications and Alerts

The IT Racks monitored by the Thermal Map wireless sensors are graphically displayed under the AKCP Pro Server monitoring software. In case of critical events in server cabinet, you and your colleagues will be informed early from the L-DCIM Gateway and the integrated monitoring software via e-mail and or SMS (via optional 3G GSM modem). With AKCP Pro Server you can also create reports on rack monitoring / cabinet monitoring.

Related links to "AKCP Wireless Sensor Thermal Map"
Radio technology: LoRa
Radio frequencies EU: 863 ~ 870Mhz, max. TX +14 dBm, duty cycle 1%
Suitable for: L-DCIM sensor gateway (must be ordered separately from Didactum)
Temperature range: -40 ° C to + 75 ° C
Resolution: 0.1 ° C
Accuracy Temperature sensor: ± 0.3ºC at -40ºC, ± 0.3ºC at + 25ºC and ± 0.3ºC at + 75ºC
Humidity range: 0 to 100% relative humidity (RH)
Accuracy Humidity sensor: ± 3% relative humidity at + 25 ° C
Resolution: 1%
Permissible operating environment: -35 ° C to + 80 ° C at 20% to max. 80% humidity (non-condensing)
LED status display: Yes
Energy consumption: 12 mWatt on average
Average battery life *: 10 years at + 25 ° C with radio transmission interval every 15 minutes
USB power supply: Climate wireless sensor can be supplied with power via USB cable if required (optional)
Case dimensions: Ø 77 x 47mm
Degree of protection Housing: IP54
Certification: FCC Part 15C, EN300220-2
Versions: The Thermal Map wireless sensor is available with 3 or 6 pcs. temperature and humidity sensors from the official AKCP dealer Didactum.
HS Code: 90259000
Country of origin: Republic of the Philippines
Read, write and discuss reviews... more
Customer evaluation for "AKCP Wireless Sensor Thermal Map"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.