Prices plus VAT plus shipping costs
Delivery time 15 Workdays
- Order number: E_10270
- Short description: AKCP securityProbe 5E-X60 Monitoring Device
AKCP securityProbe 5E-X60 Monitoring Device
The securityProbe 5E-X60 Monitoring Device is compatible with all Intelligent Sensors from AKCP / AKCess Pro and provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors. The securityProbe 5E-X60 has 60x 2 Wire Dry Contacts. An additional 2 Gigabyte SD card can be installed to provide greater storage capacity. It boasts High Speed USB 2.0 connectivity with ports available to connect 1x EDGE-180M USB Modem. The securityProbe 5E-X60 is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios. It has an easy-to-use web-based user interface for sensor configuration, data collection and visual graphing. It supports SNMP v3 with full encryption.
The securityProbe 5E-X60 also supports Modbus Master/Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway. The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E-X60 has a battery backed time of day clock for accurate record keeping.
AKCP securityProbe 5E-X60 OnBoard Architecture
Up to 8 of AKCP’s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, sensors automatically configure themselves and go ‘online’. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. Our easy-to-use port numbering system allows you to setup the securityProbe 5E-X60 within minutes.
- AKCP iMX25 CPU
- 128 MB of SDRAM
- 128 MB NAND Flash
- 10/100 Mbps Ethernet Port
- 1x USB 2.0 Modem Port
- 4x BNC Video Ports
- 60x Dry Contact Inputs
- RS485 Ports
- Internal Audio Speaker
- Internal Microphone
- 8 Full Auto Sense RJ-45 Ports (Maximum of 500 Sensors)
- 4x RJ-45 Expansion Ports
Connect up to 4 External IP Cameras
The securityProbe 5E-X60 can display pictures from a maximum of four ip cameras simultaneously in several sizes, up to 640x480 pixels resolution. AKCP ip cameras are used in professional monitoring and CCTV Monitoring Devices. A built-in pan-tilt controller interface allows complete control of pan and tilt cameras using the industry standard Pelco D bus.
The securityProbe 5E-X60 Monitoring Device integrates and displays graphs of all sensor data in its web-based user interface. The individual graph (day, week, month and year) for each sensor type can be customized, simply by modifying the script template used to generate a particular graph. RRD tool is used to build an embedded database of sensor data. This data can be accessed from the web interface, or downloaded to a remote PC. MRTG can be used to generate real-time graphs of sensor data on a remote website.
False Message Filter
In order to prevent false alarms, the securityProbe 5E-X60 allows extensive filtering of events. You can limit events based on the time of day or the day of the week. You can also limit the number of alerts per hour, so that you are not swamped with many messages. This is especially important with the sensor like the motion detector where you may want to process an event only when the business premises are closed.
Sensor Integration & Notification System
Up to 8 of AKCP’s Intelligent Sensors can be connected to the securityProbe 5E-X60. When plugged in, the sensor automatically configures itself and goes online. Using the either the E-sensor 8, or the E-opto 16 expansion modules, up to 500 sensors can be connected to a single unit. The easy-to-use web based interface allows you to setup the securityProbe 5E-X60 Monitoring Device within minutes. When online, the sensors use their 4 levels of threshold checking and report any status change.
Notifications and alarms can be dependent on the states of multiple sensors, and can be configured to escalate in severity over time. The notification system can alert you of a problem via e-mail, SMS messages and telephone calls, (additional hardware required), or send a message to any commercial network Monitoring Device using SNMP traps. The AKCP securityProbe 5E-X60 can automatically switch a relay on or off, wake-up or shut down a remote server, send pictures and data via FTP, send a FAX, run your custom script and many more versatile functions.
The securityProbe 5E-X60 can automatically push out the complete status of the unit and sensors via the Heartbeat Message feature. This can be setup to be sent through e-mail, SMS or SNMP traps. A HTTP get script can also be chosen, allowing the data to be pushed to web servers.
Features List AKCP securityProbe 5E-X60
- Embedded web server displays sensor information and live video from connected ip cameras.
- Control 4 pan tilt dome cameras directly from the web interface.
- Record digital video to remote servers or internal memory, or send live images to your own website.
- Connect up to 4 Universal Mount Digital Cameras, and simultaneously display images up to 640x480px resolution.
- Receive notifications of anomalous events via e-mail, SMS / MMS, SNMP traps, and many more.
- Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
- Stream video and sensor information directly to your cellphone or PDA.
- Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
- Uses Linux operating system for maximum stability and flexibility.
- Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
- Built-in graphing and data logging, internally or to a remote PC.
- Platform independent; free firmware upgrades and utilities from AKCP.
- Monitor up to 500 intelligent sensors using expansion modules (E-Opto 16 and E-Sensor 8 )
- Compatible with complete range of AKCP´s Intelligent Sensors
- Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP
|Mounting||2U rackmount brackets included|
|Interface ports|| |
Standard 10 Base-T Ethernet RJ-45 Port
|Power Requirements||7.0 - 9 V/> = 3 Amp|
|Power Consumption||6.150 Watt, 0.82A|
8 RJ-45 ports for connecting AKCP sensors
Ext. Speaker Out, 3.5mm jack (Analog)
|Operating Environment|| |
Temperatur : Min. -35°C - Max.55°C
|Intelligent sensors||8 + expandable|
|Connect Voice modem||Yes - USB adapter needed|
|Send e-mail alerts||Yes|
|Send SMS alerts||Yes - requires GSM modem (not included)|
|Send MMS alerts||Yes - requires GSM modem (not included)|
|Skype call alerts||Yes|
|Telephone call alerts||Yes - requires GSM modem (not included)|
|Control Siren & Strobe Light||Yes|
|Wake Up / Shutdown||Yes|
|Camera Motion Detection||No|
|Sensor Mapping Module||Yes|
|Sensor Notification Wizard||Yes|
|Keep alive e-mail||Yes|
|Keep alive trap||Yes|
|Network Time Protocol (NTP)||Yes|
|Advanced log filter||Yes|
|Delivery||AKCP securityProbe 5E-X60, external power supply, 8 ports for connecting the intelligent AKCP sensors, including 1x combined sensor temperature and humidity (AK-THS00) with optional cables up to about 300m renewable. Manual, MIB files and SNMP tools on CD.|