+49 2501 - 9 78 58 80 (Monday - Friday, 09:00 - 17:00 h)

  Our competent sales team is looking forward to your call!

  Contact: support[at]didactum-security.com

sensorProbe Bundle - Water, temperature and humidity

482.00€ *
Content: 1 Package

Prices plus VAT plus shipping costs

Delivery time 14 Workdays

  • E_10277
  • AKCP sensorProbe2 Bundle - Water, temperature and humidity
AKCP sensorProbe2 Bundle - Water, temperature and humidity The AKCP sensorProbe2 is a... more
Product information "sensorProbe Bundle - Water, temperature and humidity"

AKCP sensorProbe2 Bundle - Water, temperature and humidity

The AKCP sensorProbe2 is a intelligent 2 port sensor device for monitoring environmental variations, power, physical threats and security. The SP2 is a completely embedded host with a proprietary Linux like Operating System, including TCP/IP stack, Web server, email and full SNMP functionality. SMS notifications can be sent via a 3rd party email-to-SMS gateway.

The AKCP sensorProbe2 comes with a new CPU that is 3 times higher speed compared to the earlier version of AKCP sensorProbe2A, faster network connection, new web interface similar to sensorProbe8 series of products including the subnet mask, remote syslog interface. It also includes a battery backed time of day clock. The new AKCP sensorProbe2 also has advance events filtering options. Now you can plug in our motion detector to the new AKCP sensorProbe2.

The important feature in AKCP sensorProbe2 is, the integration with a single chip relative humidity and temperature multi sensor module comprising a calibrated digital output. The sensor includes a capacitive polymer sensing element for relative humidity and a bandgap temperature sensor. Both are seamlessly coupled to a 14bit analog to digital converter and a serial interface circuit on the same chip. This results in superior signal quality, a fast response time and insensitivity to external disturbances (EMC). By having both temperature & humidity sensors in a single sensor, the AKCP sensorProbe2 can have up to a maximum of 2 temperature & 2 humidity sensors. This extends the capability of the AKCP sensorProbe2 to maximum of 4 sensing parameters.

Define security monitoring to your operational requirements

If you want to monitor the temperature in your Data Center in real time, the AKCP sensorProbe2 (SP2) gives you valuable services. Would you also want to be informed immediately if your server room is accessed unauthorized, so attach the AKCP security sensor or AKCP motion detectors. Define your individual early warning system to protect your IT-infrastructures
At the request of AKCP sensorProbe2 integration into network-monitoring

The AKCP sensorProbe2 is compatible SNMP v1 and SNMP configurable. This means that you could integrate AKCP sensorProbe2 (SP2) in leading network management systems (NMS), such as NAGIOS, MRTG, HP OpenView, CA Unicenter TNG, IBM Tivoli, WhatsUp Gold and many more. Didactum® supports you in the planning and implementation of network management systems e.g. WhatsUp Gold or  NAGIOS.


  • 2 RJ-45 ports for connecting AKCP intelligent autosense sensors
  • NMS integration for leading network management systems
  • Full SNMP v1 compliant
  • SNMP utilities and SNMP MIB File included
  • Supports all major communications protocols
  • Embedded web-server allows all parameters to be easily configured
  • Supports up to 2 of AKCP intelligent autosense sensors simultaneously
  • Supports SNMP polling allowing the sensor values to be collected and graphed with host applications
  • Sends trap notifications to 2 destinations
  • Sends email notifications to 2 eMail addresses
  • Email and traps include the sensor description and the current sensor value
  • User configurable thresholds for all AKCP intelligent autosense sensors

Combined sensor temperature and humidity

The AKCP dual sensor has both temperature and humidity measuring capabilities in a single sensor. This extends the capability of the sensorProbe to measure up to 8 temperature and 8 humidity sensing parameters, just by connecting 8 dual sensors.

Up to 2 dual sensors can be plugged into RJ-45 jacks on the sensorProbe2 and 8 sensors on the sensorProbe8. Each sensor comes with a free CAT 5 cable 5 feet in length. You can connect the sensor using your own CAT 5 cable up to 1000 feet, allowing the sensors to be positioned in hot spots.

When the dual sensor is plugged into the RJ-45 port, the sensorProbe will auto detect the sensor, and it will display Temperature & Humidity for each RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature and humidity variations over a period of time. Each sensor has its own SNMP OID so that data can be collected over the network and graphed using external application like MRTG.

The temperature sensor can be read using included SNMP utilities to allow graphing and datalogging at 0.2°C resolution. The AKCP temperature and humidity combined sensors are compatible with the sensorProbe2, sensorProbe8 and securityProbe monitoring equipment from AKCP. The connection is made by RJ-45 connectors. For a quick installation are all AKCP sensors combined.

AKCP Water Detector

The water detector is an advanced microprocessor based design capable of detecting distilled water. This water detector is designed and manufactured by AKCP.

Most water detectors use a technology which measures the resistance of the water. This resistance depends upon the presence of electrolytes in the water. The water in some areas is too clean, therefore the resistance is high and the typical water detector may not work.

The AKCP water Detector is an exclusive design capable of detecting the presence of even distilled water. The water detector contains microprocessor controlled capacitance measuring circuitry. This is far more precise than standard commercially available water detectors which measure the resistance of water. The resistance of water can vary depending upon the impurities in the water. Normal resistance type monitors are unable to detect the presence of distilled water due to its high resistance.

The AKCP water Detector detects water leaks and flooding with a WET/DRY indication in software. SNMP polling via snmp get available. Web browser interface available. When an alarm condition is activated the description and location of the fault can be sent via email, page.


  • AKCP sensorProbe2
  • AKCP Combined temperature & humidity sensor; about 1.5 m in length and can be extended up to about 300 m
  • AKCP water detector; cable length about 4,5 m
Related links to "sensorProbe Bundle - Water, temperature and humidity"

Specifications sensorProbe2


  • Size 4.5" x 2.5" x 1.25"
  • Weight : 0.3 Kg


  • 2 RJ-45 ports for connecting
  • AKCess Pro sensors
  • Up to 10 dry contact inputs


Operating Environment

  • Temperature : Min. -35° C - Max.80° C
  • Humidity : Min. 20% - Max. 80% (Non-Condensing)


Power Requirements

  • Voltage 7.5 - 9 V / >= 1.2 Amp

Network Interface

  • Standard 100MB Full Duplex Ethernet RJ-45 Port



  • Configurable output signals (0VDC/5VDC) on any of the 2
    RJ-45 sensor ports


Power Over Ethernet

  • SP2 PoE is IEEE 802.3af  compliant

Status Indictors

  • LED indication for Power
  • LED for Network Connectivity
  • LED for sensor online and threshold status



  • Manufactured using highly integrated, low power surface
    mount technology to ensure long term reliability.


Power Consumption

  • 1.125 Watt, 0.15A


Mounting Kits

  • 0u rack-mount, or wall hanging


  • 1,400,000 Hours

Specifications Sensor Temperature and Humidity 1,5m


Measurement Range Celsius : -40°C to +75°C
Measurement Resolution Celsius : 1°C
Measurement Accuracy Celsius : Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit : -40°F to +167°F
Measurement Resolution Fahrenheit : 1°F increments
Measurement Accuracy Fahrenheit : Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF


Measurement range : 0 to 100% Relative humidity
Resolution : 1%
Accuracy at : 25°C ±3%
Communications cable : UTP Cat 5 cable
Power source : Powered by the sensorProbe. No additional power needed
Power Consumption : Typical 7.25 mWatt, 1.45mA
  Sensor element wettable without damage
  sensorProbe auto detects the presence of the dual sensor
  Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
Important Note: The fixed one foot type or TMP01 and THS01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 or THS00 (remote type).

We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.

Specifications spotWater Detector

Measurement Range Wet or Dry ( -20°C +60°C)
Measurement Accuracy Able to measure distilled water
Sensor Type Patent pending, microprocessor controlled, capacitance measurement technology
Power source Powered by the sensorProbe. No additional power needed
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire
Measurement Rate Multiple readings every second
  sensorProbe auto detects the presence of the water sensor
  Up to 2 spotWater detectors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  Full autosense including disconnect alarm
Read, write and discuss reviews... more
Customer evaluation for "sensorProbe Bundle - Water, temperature and humidity"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.