+49 2501 - 9 78 58 80 (Monday - Friday, 09:00 - 17:00 h)

  Our competent sales team is looking forward to your call!

  Contact: support[at]didactum-security.com

Thermal Map Sensor

125.00 € *
Content: 1 Piece

Prices plus VAT plus shipping costs

Delivery time 14 Workdays

Configuration:

  • E_17000
  • Monitor the front and rear of your cabinet for hotspots.
Measure and monitor with AKCess Pro`s Thermal Map Sensor the temperature differential between... more
Product information "Thermal Map Sensor"

Measure and monitor with AKCess Pro`s Thermal Map Sensor the temperature differential between the front and the rear of your mission critical server cabinet. Use this Thermal Map Sensor to identify hotspots in your IT rack.

Typical applications of AKCP Thermal Map Sensor are:

  • real time temp measurement of air intake and exhaust of cabinet or rack
  • measurement of humidity (rH) of air intake and exhaust of rack
  • measurement of temperature differential from the front to the back of your IT Rack
  • identification of hotspot(s) in server cabinet
  • detection of failing server or cooling fans in 19" rack
  • PUE (Power Usage Efficiency) optimization

The latest version of Thermal Map Sensor consists of a string of 6 precise temperature sensors. This Thermal Map Sensor is also availabe with 2 optional humidity (rH) sensors. The installation of Thermal Map Sensor is easy. Install the temp sensors at the top, the middle and the bottom – front and rear of your server cabinet. Then you have to connect your SNMP-capable Thermal Map Sensor to a sensorProbe2+ (SP2+), sensorProbeX+ (SPX+) or securityProbe+ (SEC+) remote monitoring device (must be ordered separately here in this online store). By use of AKCP`s sensor identification feature, the Thermal Map Sensor is automatically detected by sensor controller unit.

In the webGUI of 2nd generation of sensorProbe or securityProbe remote monitoring device, the Thermal Map Sensor is shown in a „Rack Map Display“. Here you get precise information about temperature and / or humiditiy at the front and rear of your server cabinet. A useful animation will present you the front to rear temperature differential of your important IT rack. AKCP`s SNMP capable Thermal Map Sensor can be also integrated in DCIM tools and Network Management Systems (NMS).

Thermal monitoring of up to 16 server cabinets

With the 16 sensor ports sensorProbeX+ IP-based remote monitoring unit, you can monitor up to 16 cabinets or IT racks. Each Thermal Map Sensor can be extended up to 15 meters (49 ft) from the sensor controller unit.

2 models of Thermal Map Sensors

AKCP`s Thermal Map Sensors are available from official AKCP-dealer Didactum in two versions:

  • A version with 6 temperature sensors only or in a version with 6 temperature sensors and 2 humidity sensors.

Here the online shop, select the desired version in the upper right corner.

Related links to "Thermal Map Sensor"
Available downloads:

Dual Temperature

Measurement Range: -40°C to +75°C; -40°F to +167°F
Measurement Resolution: 0.1°C increments; 0.2°F increments
Measurement Accuracy: Maximum ±0.3 at -40ºC, minimum ±0.3 at +25ºC and ±0.3 at +75ºC; Maximum ±0.6 at -40ºF, minimum ±0.6 at +25ºC and ±0.6 at +167ºF
     
Dual Humidity

Measurement range: 0 to 100% Relative humidity
Resolution: 1%RH increments, 0.01%RH sensor reading
Accuracy at: 25°C ±2%RH

Single Temperature
 
Measurement Range: -40°C to +75°C; -40°F to +167°F
Measurement Resolution: 0.1ºC increments; 0.2ºF increments
Measurement Accuracy: ±0.5°C accuracy from -10°C to +75°C; ±0.9°F accuracy from +14°F to +167°F

Interface

Communications cable: RJ-45 jack to sensor using UTP CAT5e/6 cable
Power source: Powered by the sensorProbe+ familiy units. No additional power needed
Maximum Cable Length: Run length is 60 feet (18 meters) with approved low capacitance shielded cable or UTP
     
sensorProbe+ units auto detects the presence of the Thermal Map Sensor
Up to 3 dual Temperature and Humidity sensors per Thermal Map Sensor
Customizable configuration: 1 internal and 2 external
     
Important Note:

The Thermal Map sensor is only compatible with the sensorProbe+ platform units. When plugging the first time or after upgrading a sensorProbe+ unit, the sensor firmware might be upgraded by the unit and not be available right away.

Read, write and discuss reviews... more
Customer evaluation for "Thermal Map Sensor"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Temperature measuring chain Measurement Chain Temperature Sensor
Content 1 Piece
From 75.00 € *
Hint!
AKCP Rope Water Sensor - Detect water and acid leaks Water Sensor
Content 1 Piece
From 125.00 € *
Water sensor Reporting chain ropeWater Sensor
Content 1 Piece
292.15 € * 307.51 € *
Water reporting chain with localization locateWater Sensor
Content 1 Piece
447.60 € * 471.15 € *
Air Velocity Sensor Air Velocity Transmitter
Content 1 Piece
418.00 € * 440.00 € *
Viewed