Prices plus VAT plus shipping costs
Delivery time 20 Workdays
- Order number: E_17500
The sensor status light was developed by the manufacturer AKCess Pro Ltd. especially for the AKCP sensorProbeX+ and securityProbe+ remote IT-monitoring devices. This status light provides the user with a visual alarm by means of the three integrated status lights (red, yellow and green light). They warn you and your colleagues about impending risks and dangers or sudden physical changes in the warehouse, in production, in the server room or in the data center. At the same time, this original light can be used to emit an audible alarm via an integrated piezo buzzer. This siren increases the signal effect of the alarm.
Typical applications include:
- Audiovisual alerting in production or logistics infrastructure
- Rack monitoring / cabinet monitoring: Installation of the luminaire on the 19-inch network or server rack
- Visual status display of existing machines and plants
- Audiovisual fault indication / fault signaling
Easy installation of the sensor status light
The status light can be installed flexibly within the rooms and infrastructure to be monitored. For example, mount this signal light on top of the 19-inch server rack, near a machine / system or within a control room. After that, this 3-color status light with included siren is easily connected with a CAT5 network cable to a free sensor port of an IP-based sensorProbeX+ (SPX+) or securityProbe+ (SEC+) remote monitoring device. The power is supplied by the main AKCP sensor unit, so that a separate power supply is not required.
The AKCP sensorProbe 2 / 4 / 8 / -x20 / -x60 / -DCW and securityProbe 5E / 5ES / ESVA / -x20 / -x60 / DCW remote environmental and security monitoring units are not supported by this sensor status light.
Individual programming of the 3-colored status light including alarm siren
The 3-color status light can be individually programmed in the web interface of the sensorProbe2+ or sensorProbeX+ main sensor unit. AKCP`s proven Notification Wizard is available for this.
This allows the built-in luminaires to light up constantly or even to flash. In interaction with the AKCP sensors, the warning message can be signaled with the green, yellow or red warning light. If, for example, the temperature in the server rack reaches a critical level, the built-in alarm siren (piezo buzzer) can be switched on automatically in addition to the flashing (red) light. If the server cabinet runs on battery power of the UPS, the alarm can also be output with this 3-colored signal light.
|Suitable for: all AKCP sensorProbeX+ (SPX+) & securityProbe+ (SEC+) remote environmental monitoring units from AKCess Pro|
|Programming: via the web interface of the SPX+ or SEC+ main unit|
|Voltage supply: via SPX+ or SEC+|
|Connection: Via CAT5 patch cable to an RJ45 sensor port of the SPX + or SEC + main unit|
|Integrated lights: Green (permanently lit, blinking or off)|
|Yellow (permanently lit, blinking or off)|
|Red (permanently lit, blinking or off)|
|Siren: integrated piezo buzzer for audiovisual alert in the sensor connection unit|
|Dimensions signal lamp: 22.1 x 5 cm, 6.98 cm|
|Dimensions control unit: 3.3 x 4.5 x 5.6 cm|