Prices plus VAT plus shipping costs
Delivery time 15 Workdays
- Order number: E_10170
- Short description: AKCP Alarm Siren with Strobe Light - Audio and Visual Alarm
Audio and visual alarm notification!
The combined strobe light and siren can add eye-catching audio visual alarms to the AKCP sensorProbe and securityProbe monitoring devices. When triggered, the siren generates a loud alarm accompanied with a bright flashing strobe light, giving a clear alert of an alarm condition.
Powered by the base unit, with no additional power required, it’s perfectly suited for use in mission critical situations. The siren and strobe light can be triggered by another sensors status, or controlled manually via the web interface or using it’s own SNMP OID.
- Combined siren and strobe light on a single Intelligent sensor port
- Powered by the base unit, no additional power source required
- Can be extended up to 100 ft (30 m) from the base unit
- 100db Siren sound
- 400x per minute flashing strobe
|Measurement Range||Alarm or Normal|
|Communications Cable||RJ45 jack to sensor using UTP Cat 5 wire|
|Sensor Type||Open/closed contact switch|
|Power source||Powered by the sensorProbe/securityProbe. No additional power needed|
|Power Consumption||Typical 556.50 mWatt, 111.30mA|
|Measurement Rate||Multiple readings every second|
|Strobe Flash Frequency||400 Times/Minute|
|Light Source||Super bright LEDs x8|
|Maximum extension cable length 30m (100 ft.) with approved low capacitance shielded cable or UTP|
|Up to 2 Siren Strobe sensors per sensorProbe2, 4 per sensorProbe4, 8 per sensorProbe8 and securityProbe|
|Full autosense including disconnect alarm|