Prices plus VAT plus shipping costs
Delivery time 14 Workdays
- Order number: E_11002
- Additional Text: AKCP Vibration Detect Sensor - Protection against forced entry
The AKCP Vibration Detect Sensor is a normally closed input switch that will detect when there is vibration, or a window is broken. It can be connected to both the AKCP sensorProbe or securityProbe monitoring systems and then linked to notification alerts.
This sensor was designed for protecting against forced entry by hammer, saw, crowbar etc., through walls, ceilings, windows, safes, cabinets, etc., It will initiate an alarm when a vibration from a non-desirable force strikes the protected surface. A built-in tamper switch is independent from the circuit of the vibration detector for your convenience.
Vibration contacts are adjustable by turning an adjustment screw to respond to any surface - glass, wood, steel, plasterboard, or brick. Pure silver contact points ensure years of fail-free operation. Dust tight ABS case is small and inconspicuous and can be easily installed with two-sided adhesive tape.
The Vibration Detect Sensor can be connected to the AKCP sensorProbe and securityProbe monitoring systems via the RJ-45 dry contact sensors.
Or it can be directly connected to the dry contact inputs on the AKCP sensorProbe8-X20, sensorProbe8-X60, securityProbeX-20 and secuirtyProbe-X60 monitoring systems allowing security protection for many windows using only a single base unit.
|Circuit||Normally-closed contact, momentary open when activated.|
|Contact Pressure||Adjustable from 1 to 50 grams but recommended setting between 5 and 25 grams only. Supplied with pressure of approximately 6 grams.|
|Rated||1A at 50VDC|
|Contact Break Time||Approximately 45ms maximum (at 6-grams of pressure)|
|Life||Over 100,000 contacts|
|Size||15mm(H) x 21mm(W) x 60mm(L)|