+49 2501 - 9 78 58 80 (Monday - Friday, 09:00 - 17:00 h)

  Our competent sales team is looking forward to your call!

  Contact: support[at]didactum-security.com

Battery Monitor Sensor

129.00 € *
Content: 1 Piece

Prices plus VAT plus shipping costs

Delivery time approx. 5 working days

Current Transformer:

  • EN_13200
  • Battery Monitor Sensor
The new AKCP Battery Monitor Sensor from manufacturer AKCess Pro Ltd is a solution for networked... more
Product information "Battery Monitor Sensor"

The new AKCP Battery Monitor Sensor from manufacturer AKCess Pro Ltd is a solution for networked remote monitoring of batteries and battery banks. This SNMP enabled smart sensor consists of a battery terminal temperature sensor and a precise current transformer for remote measurement and monitoring of DC voltage and DC current. In combination with the networked sensorProbeX+ monitoring device, you can check the charge / discharge state of your battery / battery packs. AKCP`s Battery Monitor Sensor is also suitable for remote measurement & monitoring of solar and photovoltaic arrays. 

Typical applications of this Battery Monitor Sensor are: 

  • Remote measurement of DC voltage & current of existing batteries & battery packs
  • Remote monitoring of DC voltage output of batteries & solar arrays
  • Monitoring of current load on batteries
  • Remote check / determination of health status of battery arrays
  • Remote monitoring of the start-up battery of emergency diesel generator 

Practical example: Generator battery monitoring

Use the Battery Monitor Sensor with the IP based sensorProbeX+ remote unit to monitor your emergency generator. Depending on your individual setup, this smart sensor can check the the current draw on crank,or the charge current from the integrated alternator. If the current on crank decreases over a certain time period, this can signal a problem with the start-up battery of your diesel generator. So the sensorProbeX+ remote monitoring system (has to be ordered separately) will alert you and your colleagues via e-Mail and / or SMS (GSM modem or 3rd party e-Mail to SMS gateway mandatory). If you use an SNMP compatible automation-, building- or network- monitoring software, you can poll the DC voltage and current values directly.

Remote monitoring of solar panel arrays

With this smart Battery Monitor Sensor you can monitor the DC voltage and DC current output from your solar and photovoltaic panels. Get alerted immediately if the panels are running not efficiently (e.g. dirty solar panels). By comparing the battery current load and the solar panel charging load, you can also identify if your photovoltaic system is providing sufficient charging power, or if you are draining your batteries, and if so at what rate they are being consumed. 

Important note: 

Select the current transducer (ct) suitable for your measuring purposes by selecting at the top right side. If no separate selection is made, the 0-50 A current transducer will be included in the scope of delivery.

Related links to "Battery Monitor Sensor"
Available downloads:
 
Suitable for: all sensorProbeX+ remote measuring and monitoring systems from AKCP (not included in delivery, can be ordered separately from Didactum).
Sensor Type: Current Transformer (ct)

Input Voltage and Current ratings :

Voltage: 0~60VDC (3 configurable ranges: 0~15V, 0~30V or 0~60V)
Current: external CT
+ 50A (standard scope of delivery)
+ 100A
+ 200A
+ 400A
+ 500A
+ 600A
+ 800A
+ 1000A
+ 1500A

Power Metering:   

DC Voltage (VDC) +/- 0,05% Full Scale, Error : +/- 0,05% Full Scale
Current (A) +/- 0,05% Full Scale, Error : +/- 0,05% Full Scale
Temperature drift: +/- 0.02 °C

Temperature Monitoring:  Temperature sensor with 1m sensor cable, range from -40° C up to +70° C
LED status indicators: LED for power and LED for input presence
Operating Environment:  -35° C up to +70° C @ 20% up to max. 80% humidity (rH) (non-condensing)
Inputs: 1x RJ45 port, 1x voltage terminal, 1x temperature terminal, 1x terminal for current transducer
 
Delivery: Battery Monitor Sensor
Read, write and discuss reviews... more
Customer evaluation for "Battery Monitor Sensor"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Hint!
Sensor potential-free contact Dry Contact Sensors
Content 1 Piece
From 35.00 € *
IO-Digital8 with 2 x RJ45 IO-digital8 sensor with 2 x RJ45
Content 1 Piece
69.00 € *
AC Sensor Controlled Relay AC Sensor Controlled Relay
Content 1
136.80 € * 144.00 € *
DC Sensor Controlled Relay DC Sensor Controlled Relay
Content 1 Piece
125.00 € *
Viewed