Prices plus VAT plus shipping costs
Delivery time 14 Workdays
- Order number: E_10163
- Short description: AKCP IO-digital8 Sensor with 2 x RJ45
AKCP IO-digital8 sensor with 8 ALARM / NORMAL indication in the web interface of the AKCP securityProbe. Can have 8 dry contacts on one Intelligent Sensor port.
The main housing can be mounted on a wall and a standard CAT5 cable can be run to the intelligent sensor port on the AKCP securityProbe.
There are two versions of the IO-digital8 depending on your requirements. The first version has a single RJ45 connector at one end and 8 x 2 pin dry contact connectors along one side. The second unit also has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.
- SNMP interface for alarm/normal status.
- SNMP traps sent when critical.
- SNMP polling via get command.
- Each of the 8 dry contacts on the IO-digital8 sensor can also be configured as outputs up to 20mA.
|Measurement range :||Alarm or Normal|
|Communications cable :||RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP|
|Sensor type :||Open/closed or cycles contact switches|
|Input voltage range :||0 to 5 volts on each of the 8 dry contacts|
|Current Range :||Can sink up to 20 mAmps on each of the 8 dry contacts|
|Measurement rate :||Multiple readings every second|
|Power source :||Powered by the securityProbe 5E. No additional power needed|
|Normal input voltage is settable under software on each of the 8 dry contacts|
|Normally open, normally closed is settable under software on each of the 8 dry contacts|
|Only compatible on AKCess Pro securityProbe line of units|
|securityProbe 5E autodetects the presence of each dry contact on the IO-digital8|
|Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box|
|Full autosense including disconnect alarm|