+49 2501 - 9 78 58 80 (Monday - Friday, 09:00 - 17:00 h)

  Our competent sales team is looking forward to your call!

  Contact: support[at]didactum-security.com

IO-digital8 sensor with 8 x 2 pin dry contact connectors

IO-Digital8 with pin strip
€69.00 *
Content: 1 Piece

Prices plus VAT plus shipping costs

Delivery time 14 Workdays

  • E_10168
  • AKCP IO-digital8 Sensor with 8 x 2 pin dry contact connectors
AKCP IO-digital8 sensor with 8 ALARM / NORMAL indication in the web interface of the AKCP... more
Product information "IO-digital8 sensor with 8 x 2 pin dry contact connectors"

AKCP IO-digital8 sensor with 8 ALARM / NORMAL indication in the web interface of the AKCP securityProbe. Can have 8 dry contacts on one Intelligent Sensor port.

The main housing can be mounted on a wall and a standard CAT5 cable can be run to the intelligent sensor port on the AKCP securityProbe.

There are two versions of the IO-digital8 depending on your requirements. The first version has a single RJ45 connector at one end and 8 x 2 pin dry contact connectors along one side. The second unit also has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.

The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.

Typical applications:

  • SNMP interface for alarm/normal status.
  • SNMP traps sent when critical.
  • SNMP polling via get command.
  • Each of the 8 dry contacts on the IO-digital8 sensor can also be configured as outputs up to 20mA.
Related links to "IO-digital8 sensor with 8 x 2 pin dry contact connectors"
Available downloads:
Measurement range : Alarm or Normal
Communications cable : RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP
Sensor type : Open/closed or cycles contact switches
Input voltage range : 0 to 5 volts on each of the 8 dry contacts
Current Range : Can sink up to 20 mAmps on each of the 8 dry contacts
Measurement rate : Multiple readings every second
Power source : Powered by the securityProbe 5E. No additional power needed
  Normal input voltage is settable under software on each of the 8 dry contacts
  Normally open, normally closed is settable under software on each of the 8 dry contacts
  Only compatible on AKCess Pro securityProbe line of units
  securityProbe 5E autodetects the presence of each dry contact on the IO-digital8
  Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box
  Full autosense including disconnect alarm
Read, write and discuss reviews... more
Customer evaluation for "IO-digital8 sensor with 8 x 2 pin dry contact connectors"
Write an evaluation
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.

Hint!
Sensor potential-free contact Dry Contact Sensors
Content 1 Piece
From €35.00 *
Sensor potential-free contact with 5 inputs 5 Dry Contact Inputs
Content 1 Piece
From €50.00 *
IO-Digital8 with 2 x RJ45 IO-digital8 sensor with 2 x RJ45
Content 1 Piece
€69.00 *
4-20 mAmp Signal Converter 4-20 mAmp Sensor
Content 1 Piece
€125.00 *
Isolated Digital Voltmeter Isolated Digital Voltmeter
Content 1 Piece
€125.00 *
Viewed