Prices plus VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: E_14076
- Additional Text: Bundle Rackmonitoring consisting of Didactum Monitoring System 100 incl. Temperature sensor, rack mount kit, humidity sensor, dry contact mounting, alarm siren
Monitoring System 100 – networked monitoring system for wiring closets and server room environments
The advanced Monitoring System 100 II is the entry level model of the high-end surveillance systems. This monitoring appliance is designed and manufactured within the EU. The engineering and support of the Didactum SNMP-enabled monitoring devices are located in Germany.
Important features of this Didactum IP-based surveillance system are:
- Completely automated and imbedded operation, no software installation required
- Multilingual Web Interface (English / French / German / Italian / Korean / Polish / Russian / Spanish / Turkish)
- Fully SNMP v1 / v2c / v3 compatible for integration into NMS and SNMP monitoring tools. SNMP MIB Files and Nagios plugins included.
- 4x auto-sensing ports for up to 4 IP-enabled Didactum sensors
- 1x CAN Bus port (Controller Area Network) for additional CAN-Units and digital CAN-Sensors
- 4x inputs for remote dry contact monitoring
- 2x 12V 0.25A relay outputs for sirens or for building control
- 1x internal Quad-band GRPS- / GSM-Modem (ordered separately) for SMS-Alerts
- 1x 1-Wire extension unit for Access Control (ordered separately)
- Comprehensive notification and alarm functions such as E-mail, SMS (GSM modem required) and / or SNMP traps
- Includes 1x IP temperature sensor
Compact Monitoring System for sensitive wiring closets and server rooms
The network-based Monitoring System 100 is very versatile. Thanks to the extensive range of the analog sensors, you can equip this LAN-based monitoring device with individual sensors. Each analog sensor is equipped with its own OID (Object Identifier). The 3rd generation of Monitoring Systems 100 is equipped with CAN Bus port. CAN (Controller Area Network) is an industrial bus standard.
Here you can attach the optional Sensor Expansion Unit or addtional CAN sensors. Up to 32 sensors can be controlled in realtime by a single Monitoring System 100 . The total length of CAN bus can be up to 225 meters (738 ft). All of the Monitoring System 100 connected sensors can directly queried (polled) using SNMP commands via TCP/IP network or Internet.
We provides real-time monitoring of key environmental and safety factors, including critical sensors:
- Temperature sensors for precise measurement and control of room temperature
- Humidity sensors for measuring and monitoring the humidity of the ambient air (static)
- Combined temperature and humidity sensors using only one port of your monitoring unit
- Smoke detectors for the reliable detection of a smoldering fire and flames
- Water Sensors for precise alerts when water damage is immanent
- Water leakage cables in individual lengths of up to 50 meters for monitoring double floors, walls, ceilings or (water) pipes.
- Door contact sensors for monitoring doors of switching, network or server cabinets
- Siren sensors with built-in strobe light for the audio visual alarms
- AC- and DC- voltage sensors and transducers for network-based monitoring of power
- PIR motion detectors for remote security monitoring of mission critical (IT-) infrastructure
- Combined smoke, humidity and temp sensors and many more…
In order to ensure trouble-free operation of the measurement sensors in a server room and in industrial environments, the engineers decided consciously to use only wired sensors! This decision was based on testing of EMI and other factors that wireless sensors are effected by and could be unreliable. The network-enabled temperature sensor is already included so that you can create a network or Web-Thermometer. Simply connect the temperature sensor with the included patch cable. Then connect the sensor cable to one of the 4 sensor connections of the monitoring system. The temperature sensor is then autosensed immediately and detected by the monitoring system and listed in the German Web GUI. The temperature sensor can be extended up to 100 meters from the base unit so that a measurement and monitoring of important environmental factors such as temperature in other rooms is possible. The wiring of the sensors is carried out with inexpensive RJ-11 patch cable.
Integrated data logger with XML- and CSV export functions
The temperature and humidity values are measured by the sensors in real time and saved in the data logger of IP-based remote measurement system. You can view the measurements within the HTML5 web interface where the diagrams can be displayed and evaluated directly. These temperature measurements that are monitored within the critical areas and equipment determines whether the required room temperature has been complied to during the framework of detection, controls and audits. This allows the temperature sensor data stored on the unit can be easily exported in CSV format or XML for further processing with MS Excel. The recorded measured values in real-time can also be used for data visualization, for example the RRD tool Cacti or it can easily be transferred.
Comprehensive notification and alarm functions of the monitoring system
The Monitoring System 100 II is designed for 24/7/365 monitoring of mission-critical facilities and equipment. During the design process the existence of fans or portable hard drives was deliberately omitted. Not sacrificing users on extensive types of notifications and alerts! Thus, critical events, such as too high a temperature, system via email, SMS are reported (via optional Quad-Band GSM Modem) or SNMP Trap from monitoring. In the multlilingual WebGUI of IP-based remote monitoring system, logic operations and individual alarm schedules can be easily defined.
The air conditioning in server room fails. The temperature sensor detects a critical increase of temperature to 30 ° Celsius. There upon the Monitoring System 100 sends multiple email notifications to responsible admins and IT decision makers. The responsible building engineer is alerted via SMS from the monitoring unit, including an indication of the critical reading and alert (GSM modem required). The Nagios Management System (NMS) that is installed in the headquarters is informed by the remote monitoring device via SNMP traps. At the same time the siren / strobe light alarm on system is triggered. In addition the building control gets an alert via the relay circuit.
The logic contained in IT Monitoring System permits a practical illustration of contingency plans. All events and state changes are recorded in the syslog of the remote monitoring unit. Per FTP upload the Syslog can automatically be sent to the headquarters and further evaluated.
Remote Dry Contact Monitoring over TCP/IP-based network
Many devices and systems in homes and commercial buildings are equipped with relays or alarm contacts. For example, via the two-wire technology signal these can be heating systems, air conditioning systems, ventilation systems, fire alarm systems, UPS systems, emergency power systems, emergency generators or reed contacts including important status and maintenance messages. Up to 4 of these dry contacts can be attached to the Monitoring System 100 .
Optional video monitoring of servers and equipment space
Using the All-in-One Monitoring System 100 this unit can also take pictures via a USB video camera. The videos can be forwarded by eMail or SMS (via optional GSM Modem) to security personnel. Increase the security of your technology or server space by introducing a low-cost video surveillance system.
Didactum temperature sensor - Temperature monitoring of sensitive infrastructures
Measure and monitor this important environmental factor in your temperature sensitive infrastructure. Make sure that a sudden temperature does not affect your mission critical infrastructure. A permanent temperature recording is important in the context of compliance. It is also suitable for audits.
Typical applications of the Didactum temperature sensor:
- Temperature monitoring of mission-crtitical infrastructure
- Long-term measurement of the temperature in warehouses, depots and archives
- Temperature monitoring of enclosures and server cabinets
The temperature sensor is easily connected via RJ11 patchcable to the Didactum monitoring system and automatically displayed on it`s WEB GUI. As part of the temperature monitoring, you can easily query this sensor via Network or Internet.
The temp sensor can be located up to 100 meters from the Didactum monitoring devices by using your own RJ-11 cable. Each sensor can be configured in the web interface of the Didactum monitoring system individually. Specify the individual limit and warning values of each sensor! Get reliably informed by e-mail or SNMP traps.
The environmental factor humidity (RH) plays a significant role in many mission-critical infra- structures in today’s world where these systems are highly sensitive and can be very vulnerable to failure due to sudden changes in their installed environments.
For example low humidity levels can cause static charges which can be disastrous for computing equipment in server rooms and data centers, possibly causing catastrophic failures.
Another example would be the presence of excessive humidity which can cause the formation of condensation. These often unnoticed or unseen microscopic water particles can be present on your server’s mainboards and most likely would dead to short circuits or other severe damage to your critical equipment. Therefore, it is highly useful to measure relative humidity consistently and permanently within your sensitive areas and to be alerted immediately if your humidity levels are in danger of causing irreversible damage to your critical infrastructures.
The installation of humidity sensors also enables the monitoring and control of your installed ventilation and air conditioning systems. The Didactum humidity sensor can ensure that your important HVAC equipment is functioning properly and is providing the proper humidity levels.
Typical applications for the Didactum humidity sensor (RH):
- Measurement of humidity in Technical and Computing Rooms, IT-Infrastructure
- Humidity measurement in production areas
- Long-term measurement of the relative humidity in warehouses, depots and archives
- Monitoring of air conditioning and ventilation systems
- Automation Technology
- House and building automation systems
- Prevention of mold formation (black mold, etc.)
Easy installation of Didactum humidity sensor:
The installation of Didactum`s relative humidity sensor is simple. You just have to connect the included patch cable from the humidity sensor to the network enabled Didactum monitoring device. On request you can extend this humidity sensor up to 50 meters from the Didactum monitoring unit. Per the Auto-Sense function of this sensor it is automatically detected and displayed in Didactum`s easy-to-use multilingual web GUI. Didactum`s humidity sensor is supplied with 2 meters patch cable and mounting hardware (screws / mounting tape).
Alarm Siren With Stroboscope
Reliable audio and visual alarms for critical events in critical infrastructures
Use the Didactum siren for issuing warnings and alerts for critical events. This sensor will reliably alert your staff and security personnel of critical conditions. Didactum`s siren offers a combined audio and visual alarm for the reliable notification in noisy production areas or data centers.
Typical uses of Didactum`s alarm siren with the integrated strobe flash light are:
- Warnings by the siren and strobe light of critical events such as fires or leakages
- Alerts of critical environmental conditions (temperature / humidity / air circulation)
- Warning signals due to the failure of critical production equipment and machinery
- Alarms due to unauthorized access to restricted areas or intruders
- Alarm forwarding from dry contacts and relays
Characteristics of Didactum’s siren with built-in strobe light
A powerful siren with the loudness of 107 dB and a brightly lit strobe light unit are integrated in Didactum`s siren and strobe. The strobe flashes its alerting light up to 140 times per minute. This sensor is simply connected to the 1-Wire port on the Didactum Monitoring Systems Series 500/500-DC / 600. The sensor is powered via the Didactum monitoring system. No additional power source is needed.
Convenient configuration in the web front end of the Didactum IP Monitoring Systems
Within the multi-lingual web GUI of the SNMP enabled Didactum remote monitoring system you can easily configure the siren with the integrated strobe light. You can define which states and actions should be signaled via Didactum`s alarm siren and strobe. You can also define in case of a fire the siren alerts also include the strobe light to be switched on. In the Web interface you can define individual and even multi-level settings for the Didactum sensors including CAN-Bus devices. Dry contacts* connected to Didactum`s SNMP enabled monitoring device can also be triggered by an alarm via the siren (* optional feature).
Connector for 12V Relay output of Didactum Monitoring Systems 100/500/500DC. Optional RJ-9 connection to 1-Wire port of the Didactum Monitoring Systems 400/600.
Dry Contact Access Sensor"
Smart multi monitoring
Simple sensor lets you remotely monitor any doors or windows in any location in the data center from internet
Sensor provides 3-level user authentication
Simply connect sensor to any unit dry contacts.
At installation on doors, windows, etc., sensor controls status of door, window: opened, closed.
|Delivery of this Package:||Didactum Monitoring System 100; EU-execution; external 230V AC power supply.|
|Didactum Sensor Temperature:||Didactum Sensor Temperature, 4-wired patch cable RJ11 (2m), 4.8×16mm screw, double sided sticker.|
|Didactum Monitoring System 100|
|IP monitoring: via web, SNMP, manually via SMS (order GSM modem separately)|
|Control: Administrative 3-level control of sensors and output contacts with login|
|Firmware: Free firmware updates within Didactum Lifetime Support|
|Interface: HTML-5 WebGUI. Multi-Lingual. Configuration via internet browser (Internet Explorer is NOT supported).|
|LAN: Ethernet 10 / 100Mbit|
|CPU: ARM CPU with 300 MHz, fanless|
|Virtual Sensors: Yes|
|Network protocol: DHCP, HTTP, HTTPS, SSL, SNMP, SNMP, SMTP, SSL, CAN, FTP, Syslog, Radius, TLS|
|Alarm types: FTP, Syslog, SMTP, SNMP, SMS (GSM modem order separately), 2 output contacts|
|Dry contacts: 4x dry contact ports for digital / potential-free contacts|
|Sensor Ports: 4x RJ11 Auto Sensing Sensor Ports|
|Alarm output: 2x 12VDC relay|
|LEDs: built-in LED lights for status display|
|Clock: integrated clock with NTP time synchronization|
|USB: 1x 2.0 HS Mini USB for optional USB video camera or USB memory stick|
|Recording power approx. 8 watts|
|Power supply: External EU power supply 12V, 500mA|
|Dimensions: 14 x 3.5 x 8 cm (without rack mount kit)|
|Permissible operating environment: -10 to + 80 ° Celsius with rel. Humidity from 5 to 80% (non-condensing).|
|Net weight 0.5 kg|
|Didactum Sensor Temperature|
|Operating temperature||-40… +100°С|
|Maximum distance||100 meters|
|Customs code||9025 11 800 0|
|Installation||On the bottom there is a ledge with Ø4.5mm and height 1mm and a mounting hole in 50mm from it for fastening the sensor using 4.8×16 mm screw.|
|Connection||Temperature sensor contains RJ-12 jack and is connected to an analog input of a system unit. Determination of type of sensor and connection occur automatically.|
|Measured humidity range||0-100% RH|
|Operation temperature range||-40 .. +100°С|
|Maximum distance||50 meters|
|Customs code||9025 80 400 0|
|Installation||On the bottom there is a ledge with Ø4.5mm and height 1mm and a mounting hole in 50mm from it for fastening the sensor using 4.8×16 mm screw.|
|Connection||Humidity sensor contains RJ-12 jack and is connected to an analog input of any system unit. Determination of type of sensor and connection occur automatically.|
|Supply includes||Sensor, 4-wired patch cable RJ11 (2m), 4.8×16mm screw, double sided sticker.|
|Dry Contact Sensor|
|Installation||Using two wire, sensor is connected to a dry contacts of any system unit. One of devices in the kit, for example, magnet, is mounted on a door; the second device is mounted on a jamb of a door. At opening a door contact is disconnected and monitoring system receives notification on opening.|
|Supply includes||Magnet, contact sensor with 2-wire cable (37cm).|
|Dimensions (LHW)||Two compact devices with dimensions 29×19×7mm|
|Alarm Siren With Stroboscope|
|Volume of the internal siren: 107 decibels|
|Tone frequency of the siren: 3.8 KHz|
|Frequency of the built-in LED strobe lights: 140 per minute|
|Connection cable: 5 meters including RJ-9 connector (optionally extendable)|
|Connection: RJ-9 connector to 1-Wire port of the Didactum monitoring system|