Prices plus VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: E_14014
- EAN 0720089658571
- Short description: Vibration Sensor - Monitoring of Vibrations
The vibration detector was developed specifically for the Didactum high-end monitoring systems and is used to detect shocks and vibrations. Shaking and drilling on surfaces are recognized by this vibration detector and reported immediately to the network enabled Didactum monitoring system.
Quick installation of the IP-based vibration sensor
Via the patch cable included, the vibration alarm sensor is connected to the Didactum monitoring system and will be automatically detected by the units built-in autoidentification feature.
From within the multilingual web interface of Didactum´s main monitoring unit you can then set your desired alerts. All the required accessories for mounting and connecting the vibration sensor are included with every sensor. If your project requires more than one vibration sensor you can use patch cable to daisy chain, or cascade more sensors using the same port on your Didactum main monitoring unit. This is ideal for securing larger premises and equipment.
Typical applications include the vibration detector:
- Detection of vibration / shock
- Monitoring of windows, plasterboard walls and glass doors
- Monitoring of machines (eg ATMs)
- Monitoring of cabinets and walls
Easy installation of Didactum vibration detector
The installation of the vibration sensor is very easy. Simply connect the sensor using the included 2 meter patch cable to the IP-based Didactum alarm system. The vibration sensor is supplied complete with mounting hardware (screws / mounting tape). If required, you can install the vibration sensor up to 145 meters from the Didactum base unit.
- Do you have any questions concerning this product?
- Didactum Knowledge Base
- Further products by Didactum
|Technical specifications |
|Maximum distance||150 meters|
|Customs code||9031 810 380 0|
|Installation||Using patch-cable RJ-12 sensor curcuit is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. At impact or attempts of jolting or drilling of the surface on which the sensor is established, contacts of the sensor respond and the system receives message. |
The first sensor is connected using patch-cable RJ-12 to an analog input of the system unit, the consequent sensor is connected via patch-cable RJ-12 to an output of the first sensor and so on.
|Supply includes||Vibration sensor, 4-wired patch cable RJ-12 (2m), screw 4.8×16mm, double sided sticker.|
|Dimensions (LHW)||Compact device with dimensions 60×18×18mm|