Prices plus VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: E_14110
- EAN 0720089658892
- Short description: The 1-Wire extension board supports the connection of RFID card readers and electronic key readers to the networked remote monitoring unit.
This 1-Wire module is compatible to the latest generation of Didactum`s SNMP-enabled remote monitoring devices.
- Didactum Monitoring System 50
- Didactum Monitoring System 100 III
You can simply place this 1-Wire board on the purchase of the monitoring unit.
1-Wire sensors for Environmental Monitoring
Connect to this 1-Wire expansion board up to 20 pieces of SNMP-enabled 1-Wire temperature sensors. You can connect these temperature sensors in series. The total length of the whole chain can be up to 100 meters (328 ft). Each 1-Wire temp sensor has it`s own SNMP OID and will be detected automatically in the multilingual webGUI of remote monitoring unit. The measured temp data of each 1-Wire sensor is stored in the integrated data logger and can be easily exported as an XML- or CSV- file. You can set individual thresholds and warning states for each 1-Wire temp sensor. In case of too high temperature, you will be reliable informed by networked monitoring system by E-Mail, SMS (via E-Mail to SMS gateway or GSM modem) or SNMP traps to your network monitoring software (Nagios, OpenNMS, WhatsUp Gold and many more). Sensor polling of 1-Wire sensors with SNMP commands is also supported by Didactum`s IP-based remote monitoring devices.
RFID card reader or electronic key reader for access control
This 1-Wire module also supports the connection of the electronic key reader or RFID card reader, so you can use your full SNMP-enabled remote monitoring device as part of the access control of important infrastructure, such as a computer room or server room. On request, the network-enabled monitoring systems can also control electromechanical door lock systems from existing network and server racks. Prevent unauthorized access to business-critcal IT equipment housed in server cabinets.
|Installation: internal mounting|
|Supported monitoring units: 50 / 100II / 500 II remote monitoring units only|
|Dimensions: 4,4 x 2,3 x 1,4 cm|
|Inputs: 1-Wire / RJ-9|
|Status indicators: Status LED for 1-Wire Sensors|
|Operating environment: -10°C up to +85°C (14° to 185°F) at 5% to max. 95% humidity (RH) (non-condensing)|
|Net weight: 55g|
|HS Code: 847150000|
|Manufactured in: Made in EU|
|Notes: 1-Wire board and expansion board can not installed together in one 500 II monitoring unit|
|Delivery: 1-Wire sensors or RFID card reader / electronic keys not included (must be ordered separately)|