Prices plus VAT plus shipping costs
Delivery time approx. 5 working days
- Order number: E_50010
- Short description: ZigBee Contact Sensor ZBS-132
The ZigBee Contact Sensor ZBS-132 is a flexible, programmable and intelligent contact and glass breakage sensor for doors and windows. It transmits these events via a ZigBee network to the network coordinator.
Easy and clear text communication allow fast and safe integration into existing or new wireless networks. Despite the local intelligent controller subsystem the whole system works economically and efficiently. A few μA standby current assure battery endurance for years. To ensure safe and continuous operation, the batteries´ voltage is analyzed during wireless transmission (under load). This status is getting transmitted to the network coordinator with the next request – long time before final power loss.
- Inspection of 2 internal door or windows contacts
- Inspection of 1 external contact on demand
- Free configuration of NCC/NOC (normally closed / normally open) contacts
- Detection of breakage of glass (acoustically) on demand
- Battery-Low message
- 2.4 GHz
- Transmit power +1 dBm (1 mW)
- Receiver sensitivity: -92 dBm
- Firmware upgradable via ZigBee network
The easy to use command interface is self-evident and perfect for debugging or integration work. „SET“ commands are defining and configuring measurements and polarities. „GET“ commands are collecting sensor data and device specific details.
In case of sending an alarm event telegram, the device will transmit this message periodically till the main application confirms its receipt explicitely. Several network parameters like signal strength (RSSI) and the ID of parent devices are also accessable and explore the actual ZigBee network topology.
Made in Germany
All steps from development, assembly, testing and quality assurance take place in germany. Customized solutions can be realized fast and reliable through our engineering team.
To use this sensor, you need a gateway (ZBG-100) to which you can connect up to 10 sensors. With a router (ZBR-100), you can expand this network by another 10 sensors. You will also need a preinstalled NMS system. It is Nagios, OpenNMS or Nagios.
|RF:||ZigBee 2.4 GHz |
TX: +1 dBm (+1 mW)
RX: -92 dBm
|ZigBee role:||End node|
|Dimension:||60 ( 76 with flange) x 35 x 15 (B x H x T in mm)|
|Power supply:||1x CR2450 3V Li|