Prices plus VAT plus shipping costs
Delivery time approx. 5 working days
- Order number: E_50016
- Short description: ZigBee Handheld ZBS-130
The ZigBee Handheld ZBS-130 is a flexible and intelligent switch for emergency calls and access systems for the wireless network "ZigBee" (IEEE 802.15.4), in which it plays the role of an end node.
Simple plain text communication enables fast, secure and cost-effective integration into existing or new networks. Despite the integrated intelligent processor subsystem, the device works very economical and efficient. Few uA consumption guarantee the safe and long lasting operation.
A proactive battery monitor reports a battery change to be made long before the device is no longer accessible.
- Emergency Button
- Coarse localization by analysis of cell membership
- Integrated piezo buzzer as feedback
- Color selection possible
- Proactive "Battery low" message
- 2.4 GHz, 868 MHz a.a.
- Transmission Power: +1 dBm (1 mW)
- Receive Sensitivity: -92 dBm
- By radio firmware upgradable
The command interface is designed very simple and human-readable. "SET" commands measurements can be activated or deactivated and activated the visual and acoustic feedback events. With "GET" commands variety of parameters can be queried are.
Transmission security / tracking
If there is an emergency to be transmitted, as long as this is sent cyclically until this is definitely received by the monitoring application but not only explicitly acknowledged.
If the device is outside the wireless network, the network rescan interval is extended piece by piece in order to maximize the battery life.
Various readable network parameters such as signal strength (RSSI) and the ID of the nearest router can be continued to a rough positioning.
Made in Germany
All steps of the development, testing, assembly and quality control take place in Germany - so customer-specific requirement can be implemented quickly and easily.
To use this sensor, you need a gateway (ZBG-100) to which you can connect up to 10 sensors. With a router (ZBR-100), you can expand this network by another 10 sensors. You will also need a preinstalled NMS system. It is Nagios, OpenNMS or Icingia.
|RF:||ZigBee 2.4 GHz |
TX: +1 dBm (+1 mW)
RX: -92 dBm
|Dimension:||43 x 70 x 20 (B x L x H in mm)|
|Power supply:||1x CR2450 3V Li|